Connect and pair
Short answer
There are many ways to connect to your Bromley 150 party speaker, both wirelessly and using cables.
Pairing with a Bluetooth Device
Bromley 150 can connect to 2 Bluetooth devices at a time and remembers up to 10 previously paired devices. When in range, it will try to reconnect with the last connected device.
Use the Source selector button to select Bluetooth.
Push the Source selector button for 2 seconds until the Bluetooth source LED turns to a slow pulse.
Select Bromley 150 from your audio device's Bluetooth list.
Connecting to The AUX Input
Connect a lead with a 3.5 mm stereo jack to AUX IN on the back of the speaker.
Connect the other end of the lead to the audio output on your audio source.
Use the source selector button to select AUX.
Note: Audio leads are not included.
Connecting Audio Cable to USB-C
Connect a USB-C audio lead to the USB-C port on the back of the speaker.
Connect the other end of the lead to the audio output on your audio source.
Use the source selector button to select USB-C.
Note: Audio leads are not included.
CONNECTING TO A MARSHALL MUSIC STREAMING HUB
Multiple Marshall speakers can connect to a Heddon music streaming hub to play in sync. Go to the Marshall app and follow the in-app instructions to connect the speaker or follow the instructions below.
Make sure the Heddon music streaming hub is configured correctly.
Push the button on the Heddon for 3 seconds, until the red LED on the front starts pulsing. The hub is now in setup mode for 3 minutes.
Turn on the speakers and set them to more than mid volume.
Push and hold the M-button on the speaker for 4 seconds, until you hear a success sound.
Start playing music on your streaming app. Select Heddon as the audio output using AirPlay, Cast, or Connect.
Adjust the volume or EQ settings on your speaker to find the right balance.
Note: Marshall Heddon is sold separately.
